dmesg - N2810 Lenovo Flex 10
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-23-generic (buildd@phianna) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #31-Ubuntu SMP Tue Oct 21 17:56:17 UTC 2014 (Ubuntu 3.16.0-23.31-generic 3.16.4)
Command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/xubuntu.seed boot=casper quiet splash --
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x0000000075aabfff] usable
BIOS-e820: [mem 0x0000000075aac000-0x0000000075d2bfff] reserved
BIOS-e820: [mem 0x0000000075d2c000-0x0000000075dbbfff] type 20
BIOS-e820: [mem 0x0000000075dbc000-0x00000000763bbfff] reserved
BIOS-e820: [mem 0x00000000763bc000-0x00000000764bbfff] ACPI NVS
BIOS-e820: [mem 0x00000000764bc000-0x00000000764fbfff] ACPI data
BIOS-e820: [mem 0x00000000764fc000-0x0000000076bf0fff] usable
BIOS-e820: [mem 0x0000000076bf1000-0x0000000077ff0fff] ACPI NVS
BIOS-e820: [mem 0x0000000077ff1000-0x0000000077ffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
efi: EFI v2.31 by INSYDE Corp.
efi: ACPI 2.0=0x764fb014 SMBIOS=0x763bb000
efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB)
efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x00000000014f7000) (19MB)
efi: mem05: type=7, attr=0xf, range=[0x00000000014f7000-0x0000000002000000) (11MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x00000000033f7000) (19MB)
efi: mem07: type=7, attr=0xf, range=[0x00000000033f7000-0x0000000020000000) (460MB)
efi: mem08: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB)
efi: mem09: type=7, attr=0xf, range=[0x0000000020100000-0x0000000035502000) (340MB)
efi: mem10: type=2, attr=0xf, range=[0x0000000035502000-0x0000000036a79000) (21MB)
efi: mem11: type=7, attr=0xf, range=[0x0000000036a79000-0x0000000050f8d000) (421MB)
efi: mem12: type=2, attr=0xf, range=[0x0000000050f8d000-0x000000006e000000) (464MB)
efi: mem13: type=4, attr=0xf, range=[0x000000006e000000-0x000000006e020000) (0MB)
efi: mem14: type=7, attr=0xf, range=[0x000000006e020000-0x0000000073c45000) (92MB)
efi: mem15: type=4, attr=0xf, range=[0x0000000073c45000-0x000000007470a000) (10MB)
efi: mem16: type=7, attr=0xf, range=[0x000000007470a000-0x0000000074728000) (0MB)
efi: mem17: type=4, attr=0xf, range=[0x0000000074728000-0x0000000074749000) (0MB)
efi: mem18: type=7, attr=0xf, range=[0x0000000074749000-0x0000000074752000) (0MB)
efi: mem19: type=4, attr=0xf, range=[0x0000000074752000-0x000000007475b000) (0MB)
efi: mem20: type=7, attr=0xf, range=[0x000000007475b000-0x0000000074760000) (0MB)
efi: mem21: type=4, attr=0xf, range=[0x0000000074760000-0x0000000074764000) (0MB)
efi: mem22: type=7, attr=0xf, range=[0x0000000074764000-0x0000000074765000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x0000000074765000-0x00000000750ac000) (9MB)
efi: mem24: type=7, attr=0xf, range=[0x00000000750ac000-0x00000000756c3000) (6MB)
efi: mem25: type=3, attr=0xf, range=[0x00000000756c3000-0x00000000758ac000) (1MB)
efi: mem26: type=7, attr=0xf, range=[0x00000000758ac000-0x0000000075a0a000) (1MB)
efi: mem27: type=2, attr=0xf, range=[0x0000000075a0a000-0x0000000075a14000) (0MB)
efi: mem28: type=1, attr=0xf, range=[0x0000000075a14000-0x0000000075aac000) (0MB)
efi: mem29: type=6, attr=0x800000000000000f, range=[0x0000000075aac000-0x0000000075d2c000) (2MB)
efi: mem30: type=5, attr=0x800000000000000f, range=[0x0000000075d2c000-0x0000000075dbc000) (0MB)
efi: mem31: type=0, attr=0xf, range=[0x0000000075dbc000-0x00000000763bc000) (6MB)
efi: mem32: type=10, attr=0xf, range=[0x00000000763bc000-0x00000000764bc000) (1MB)
efi: mem33: type=9, attr=0xf, range=[0x00000000764bc000-0x00000000764fc000) (0MB)
efi: mem34: type=4, attr=0xf, range=[0x00000000764fc000-0x0000000076bf1000) (6MB)
efi: mem35: type=10, attr=0xf, range=[0x0000000076bf1000-0x0000000077ff1000) (20MB)
efi: mem36: type=4, attr=0xf, range=[0x0000000077ff1000-0x0000000078000000) (0MB)
efi: mem37: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
efi: mem38: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
efi: mem39: type=11, attr=0x8000000000000000, range=[0x00000000ffd00000-0x0000000100000000) (3MB)
SMBIOS 2.7 present.
DMI: LENOVO 20324/MELON, BIOS 93CN19WW 11/07/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFE00000 mask FFFE00000 write-protect
1 base 0FFD00000 mask FFFF00000 write-protect
2 base 000000000 mask F80000000 write-back
3 base 07C000000 mask FFC000000 uncachable
4 base 07B000000 mask FFF000000 uncachable
5 base 07AE00000 mask FFFE00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fd3000, 0x02fd3fff] PGTABLE
BRK [0x02fd4000, 0x02fd4fff] PGTABLE
BRK [0x02fd5000, 0x02fd5fff] PGTABLE
init_memory_mapping: [mem 0x75400000-0x755fffff]
[mem 0x75400000-0x755fffff] page 2M
BRK [0x02fd6000, 0x02fd6fff] PGTABLE
init_memory_mapping: [mem 0x74000000-0x753fffff]
[mem 0x74000000-0x753fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20100000-0x73ffffff]
[mem 0x20100000-0x201fffff] page 4k
[mem 0x20200000-0x73ffffff] page 2M
BRK [0x02fd7000, 0x02fd7fff] PGTABLE
init_memory_mapping: [mem 0x75600000-0x75aabfff]
[mem 0x75600000-0x759fffff] page 2M
[mem 0x75a00000-0x75aabfff] page 4k
BRK [0x02fd8000, 0x02fd8fff] PGTABLE
init_memory_mapping: [mem 0x764fc000-0x76bf0fff]
[mem 0x764fc000-0x765fffff] page 4k
[mem 0x76600000-0x769fffff] page 2M
[mem 0x76a00000-0x76bf0fff] page 4k
init_memory_mapping: [mem 0x77ff1000-0x77ffffff]
[mem 0x77ff1000-0x77ffffff] page 4k
RAMDISK: [mem 0x35502000-0x36a78fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000764FB014 000024 (v02 CB-01 )
ACPI: XSDT 0x00000000764FB120 0000B4 (v01 CB-01 00000003 01000013)
ACPI: FACP 0x00000000764F6000 00010C (v05 CB-01 00000003 VLV2 0100000D)
ACPI: DSDT 0x00000000764E6000 00B3A0 (v02 CB-01 00000003 VLV2 0100000D)
ACPI: FACS 0x000000007647E000 000040
ACPI: UEFI 0x00000000764FA000 000236 (v01 INSYDE H2O BIOS 00000001 ACPI 00040000)
ACPI: MSDM 0x00000000764F8000 000055 (v03 INSYDE H2O BIOS 00000001 ACPI 00040000)
ACPI: UEFI 0x00000000764F7000 000042 (v01 00000000 00000000)
ACPI: HPET 0x00000000764F5000 000038 (v01 CB-01 00000003 VLV2 0100000D)
ACPI: LPIT 0x00000000764F4000 000104 (v01 CB-01 00000003 VLV2 0100000D)
ACPI: APIC 0x00000000764F3000 000084 (v03 CB-01 00000003 VLV2 0100000D)
ACPI: MCFG 0x00000000764F2000 00003C (v01 CB-01 00000003 VLV2 0100000D)
ACPI: SSDT 0x00000000764E5000 0005D6 (v01 CB-01 CpuDptf 00000003 VLV2 0100000D)
ACPI: SSDT 0x00000000764E4000 00042B (v01 CB-01 DptfTab 00000003 VLV2 0100000D)
ACPI: SSDT 0x00000000764E3000 000058 (v01 CB-01 LowPwrM 00000003 VLV2 0100000D)
ACPI: SSDT 0x00000000764E2000 000763 (v01 PmRef CpuPm 00003000 INTL 20121220)
ACPI: SSDT 0x00000000764E1000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20121220)
ACPI: SSDT 0x00000000764E0000 00017A (v01 PmRef ApTst 00003000 INTL 20121220)
ACPI: SLIC 0x00000000764F9000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000764DF000 0003E6 (v01 Intel_ IsctTabl 00001000 INTL 20121220)
ACPI: FPDT 0x00000000764DE000 000044 (v01 LENOVO CB-01 00000001 MSFT 01000013)
ACPI: BGRT 0x00000000764DD000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000077ffffff]
Initmem setup node 0 [mem 0x00000000-0x77ffffff]
NODE_DATA [mem 0x75aa4000-0x75aa8fff]
[ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880071a00000-ffff8800737fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0008efff]
node 0: [mem 0x00090000-0x0009dfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20100000-0x75aabfff]
node 0: [mem 0x764fc000-0x76bf0fff]
node 0: [mem 0x77ff1000-0x77ffffff]
On node 0 totalpages: 483404
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 7616 pages used for memmap
DMA32 zone: 479408 pages, LIFO batch:31
x86/hpet: Will disable the HPET for this platform because it's not reliable
Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 103
PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
PM: Registered nosave memory: [mem 0x75aac000-0x75d2bfff]
PM: Registered nosave memory: [mem 0x75d2c000-0x75dbbfff]
PM: Registered nosave memory: [mem 0x75dbc000-0x763bbfff]
PM: Registered nosave memory: [mem 0x763bc000-0x764bbfff]
PM: Registered nosave memory: [mem 0x764bc000-0x764fbfff]
PM: Registered nosave memory: [mem 0x76bf1000-0x77ff0fff]
e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880075400000 s87360 r8192 d23232 u524288
pcpu-alloc: s87360 r8192 d23232 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 475702
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/xubuntu.seed boot=casper quiet splash --
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1833872K/1933616K available (7731K kernel code, 1200K rwdata, 3608K rodata, 1360K init, 1308K bss, 99744K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 7864320 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Maximum core-clock to bus-clock ratio: 0xf
Resolved frequency ID: 2, frequency: 133200 KHz
TSC runs at 1998000 KHz
lapic_timer_frequency = 532800
tsc: Detected 1998.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3996.00 BogoMIPS (lpj=7992000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff82e82000 - ffffffff82e8a000)
ftrace: allocating 29288 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Celeron(R) CPU N2810 @ 2.00GHz (fam: 06, model: 37, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (7992.00 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x763bc000-0x764bbfff] (1048576 bytes)
PM: Registering ACPI NVS region [mem 0x76bf1000-0x77ff0fff] (20971520 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 20:42:13, date: 10/24/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI Error: No handler for Region [ECRM] (ffff880073823ca8) [EmbeddedControl] (20140424/evregion-163)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.H_EC._REG] (Node ffff88007382a410), AE_NOT_EXIST (20140424/psparse-536)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007520A000 00045B (v01 PmRef Cpu0Ist 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880075213400 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880075262600 00015F (v01 PmRef ApIst 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800752359C0 00008D (v01 PmRef ApCst 00003000 INTL 20121220)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources
PCI: not using MMCONFIG
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PLPE] (on)
ACPI: Power Resource [USBC] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
_OSC request data:1 1e 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x907ffffe]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0x1050-0x1057]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io 0x1048-0x104f]
pci 0000:00:13.0: reg 0x14: [io 0x105c-0x105f]
pci 0000:00:13.0: reg 0x18: [io 0x1040-0x1047]
pci 0000:00:13.0: reg 0x1c: [io 0x1058-0x105b]
pci 0000:00:13.0: reg 0x20: [io 0x1020-0x103f]
pci 0000:00:13.0: reg 0x24: [mem 0x90714000-0x907147ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x90700000-0x9070ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x90600000-0x906fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x90500000-0x905fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0x90710000-0x90713fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x90715000-0x9071501f]
pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
pci 0000:01:00.0: [168c:0036] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0x90400000-0x9047ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0x90400000-0x904fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x75aac000-0x77ffffff]
e820: reserve RAM buffer [mem 0x76bf1000-0x77ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x05fe] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs ETD061f PNP0f13 (active)
pnp: PnP ACPI: found 4 devices
ACPI: bus type PNP unregistered
Switched to clocksource acpi_pm
pci 0000:01:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
pci 0000:01:00.0: BAR 6: assigned [mem 0x90480000-0x9048ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0x90400000-0x904fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0x907ffffe]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0x90400000-0x904fffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21980K (ffff880035502000 - ffff880036a79000)
microcode: CPU0 sig=0x30673, pf=0x8, revision=0x312
microcode: CPU1 sig=0x30673, pf=0x8, revision=0x312
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1414183340.267:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 3683
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x80000000, mapped to 0xffffc90000400000, using 4160k, total 4160k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x33000020
intel_idle: v0.4 model 0x37
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
hpet: number irqs doesn't agree with number of timers
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-23-generic xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-23-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: d120c47c14beb62ead6703d41712cc110575d297'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 2:635:751
misc uinput: hash matches
tty ttyS2: hash matches
rtc_cmos 00:00: setting system clock to 2014-10-24 20:42:21 UTC (1414183341)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 1360K (ffffffff82d2e000 - ffffffff82e82000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 448K (ffff880002790000 - ffff880002800000)
Freeing unused kernel memory: 488K (ffff880002b86000 - ffff880002c00000)
systemd-udevd[108]: starting version 208
random: systemd-udevd urandom read with 28 bits of entropy available
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
wmi: Mapper loaded
usb 2-1: got a wrong device descriptor, warm reset device
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: controller can't do DEVSLP, turning off
ahci 0000:00:13.0: irq 104 for MSI/MSI-X
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m2048@0x90714000 port 0x90714100 irq 104
ata2: DUMMY
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
checking generic (80000000 410000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 105 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] VBT doesn't support DRRS
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: HGST HTS545032A7E660, GGBZBG00, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HGST HTS545032A7 BG00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-2: new high-speed USB device number 2 using xhci_hcd
usb 1-2: New USB device found, idVendor=125f, idProduct=c08a
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: ADATA USB Flash Drive
usb 1-2: Manufacturer: ADATA
usb 1-2: SerialNumber: 1320111482190043
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-3: new high-speed USB device number 3 using xhci_hcd
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x481f01)
psmouse serio1: elantech: Synaptics capabilities query result 0x41, 0x0c, 0x06.
tsc: Refined TSC clocksource calibration: 1999.999 MHz
[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 0:0:0:0: [sda] Attached SCSI disk
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
usb 1-3: New USB device found, idVendor=5986, idProduct=054a
usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-3: Product: Lenovo EasyCamera
usb 1-3: Manufacturer: Generic
usb 1-3: SerialNumber: 200901010001
usb 1-4: new high-speed USB device number 4 using xhci_hcd
usb 1-4: New USB device found, idVendor=05e3, idProduct=0610
usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: USB2.0 Hub
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb: failed to peer 1-4-port2 and usb2-port1 by location (1-4-port2:none) (usb2-port1:usb1-port1)
usb 1-4-port2: failed to peer to usb2-port1 (-16)
usb: port power management may be unreliable
usb: failed to peer 1-4-port3 and usb2-port1 by location (1-4-port3:none) (usb2-port1:usb1-port1)
usb 1-4-port3: failed to peer to usb2-port1 (-16)
usb: failed to peer 1-4-port4 and usb2-port1 by location (1-4-port4:none) (usb2-port1:usb1-port1)
usb 1-4-port4: failed to peer to usb2-port1 (-16)
fbcon: inteldrmfb (fb0) is primary device
usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd
usb 2-1: New USB device found, idVendor=174c, idProduct=5106
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1: Product: AS2105
usb 2-1: Manufacturer: ASMedia
usb 2-1: SerialNumber: 3AF6073B113800014227
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi3 : usb-storage 2-1:1.0
usb 1-4.2: new full-speed USB device number 5 using xhci_hcd
scsi 2:0:0:0: Direct-Access ADATA USB Flash Drive 0.00 PQ: 0 ANSI: 4
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 7592960 512-byte logical blocks: (3.88 GB/3.62 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
usb 1-4.2: New USB device found, idVendor=0cf3, idProduct=3004
usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-4.4: new full-speed USB device number 6 using xhci_hcd
Switched to clocksource tsc
usb 1-4.4: New USB device found, idVendor=04f3, idProduct=021f
usb 1-4.4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
usb 1-4.4: Product: Touchscreen
usb 1-4.4: Manufacturer: ELAN
usb 1-4.4: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
scsi 3:0:0:0: Direct-Access GOODRAM C50 S8FM PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
random: nonblocking pool is initialized
sd 3:0:0:0: [sdc] No Caching mode page found
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc2 < sdc5 sdc6 >
sd 3:0:0:0: [sdc] Attached SCSI disk
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
init: plymouth-upstart-bridge main process (1005) killed by TERM signal
systemd-udevd[1169]: starting version 208
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
init: cups main process (1250) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
mei_txe 0000:00:1a.0: irq 106 for MSI/MSI-X
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
snd_hda_intel 0000:00:1b.0: irq 107 for MSI/MSI-X
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Internal Mic=0x19
sound hdaudioC0D0: Mic=0x18
usbcore: registered new interface driver btusb
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
usbcore: registered new interface driver ath3k
cfg80211: Calling CRDA to update world regulatory domain
media: Linux media interface: v0.10
Linux video capture interface: v2.00
usb 1-4.2: USB disconnect, device number 5
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:04F3:021F.0001/input/input12
hid-multitouch 0003:04F3:021F.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4.4/input0
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:054a)
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 1-4.2: new full-speed USB device number 7 using xhci_hcd
ath: phy0: WB335 2-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: Enable LNA combining
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90011300000, irq=16
device-mapper: multipath: version 1.7.0 loaded
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
raid6: sse2x1 485 MB/s
raid6: sse2x2 563 MB/s
raid6: sse2x4 971 MB/s
raid6: using algorithm sse2x4 (971 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 6685.000 MB/sec
generic_sse: 6034.000 MB/sec
xor: using function: prefetch64-sse (6685.000 MB/sec)
Btrfs loaded
BTRFS: device fsid 2457ea8b-8112-469c-9b64-1cdbdbeccb77 devid 1 transid 49 /dev/sdc1
init: failsafe main process (1426) killed by TERM signal
asus_wmi: Asus Management GUID not found
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
systemd-logind[1663]: New seat seat0.
systemd-logind[1663]: Watching system buttons on /dev/input/event3 (Power Button)
systemd-logind[1663]: Watching system buttons on /dev/input/event6 (Video Bus)
systemd-logind[1663]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[1663]: Watching system buttons on /dev/input/event0 (Lid Switch)
systemd-logind[1663]: Watching system buttons on /dev/input/event2 (Sleep Button)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: alsa-restore main process (2033) terminated with status 99
systemd-logind[1663]: Failed to start unit [email protected]: Unknown unit: [email protected]
systemd-logind[1663]: Failed to start user service: Unknown unit: [email protected]
systemd-logind[1663]: New session c1 of user xubuntu.
systemd-logind[1663]: New session c2 of user xubuntu.
systemd-logind[1663]: New session c3 of user xubuntu.
systemd-logind[1663]: New session c4 of user xubuntu.
systemd-logind[1663]: New session c5 of user xubuntu.
systemd-logind[1663]: New session c6 of user xubuntu.
systemd-logind[1663]: New session c7 of user xubuntu.
systemd-logind[1663]: Linked /tmp/.X11-unix/X0 to /run/user/999/X11-display.
usb 1-4.2: device descriptor read/64, error -110
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 9.
usb 1-4.2: hub failed to enable device, error -22
usb 1-4.2: new full-speed USB device number 8 using xhci_hcd
usb 1-4.2: device descriptor read/64, error -110
xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 10.
usb 1-4.2: hub failed to enable device, error -22
usb 1-4.2: new full-speed USB device number 9 using xhci_hcd
xhci_hcd 0000:00:14.0: Command completion event does not match command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 1-4.2: device not accepting address 9, error -62
usb 1-4.2: new full-speed USB device number 10 using xhci_hcd
xhci_hcd 0000:00:14.0: Command completion event does not match command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 1-4.2: device not accepting address 10, error -62
usb 1-4-port2: unable to enumerate USB device
EXT4-fs (sdc5): mounted filesystem with ordered data mode. Opts: (null)
systemd-hostnamed[3589]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
wlan0: authenticate with c0:a0:bb:f8:86:f8
wlan0: send auth to c0:a0:bb:f8:86:f8 (try 1/3)
wlan0: authenticated
wlan0: associate with c0:a0:bb:f8:86:f8 (try 1/3)
wlan0: RX AssocResp from c0:a0:bb:f8:86:f8 (capab=0x411 status=0 aid=2)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit
perf interrupt took too long (2549 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5009 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[drm:vlv_set_rps_idle] *ERROR* timed out waiting for Punit